Selection of the Optimal Product Delivery Model by Solving the Linear Programming Problem by the Combinatorial Method

Giyasidinov A., Kamalov A.S., Samatov U.G., Togaev Zh.Kh.

Research trainee, Andijan Machine-Building Institute, Andijan, Uzbekistan

Acting Vice chairman of the board, JSC "Uzbekiston temir yullari", Tashkent, Uzbekistan

Researcher, Tashkent State Transport University, Tashkent, Uzbekistan

Assistant, Karshi engineering economics institute, Kashkadaryo, Uzbekistan

Abstract

The issue of analysis and reduction of electricity consumption in agricultural facilities

Rakhmonоv Ikromjon Usmonovich, Omonov Fakhriddin Berdiyor o‘g‘li

Tashkent state technical university, Uzbekistan, Tashkent

Termez Branch of Tashkent State Technical University Named After Islam Karimov, Uzbekistan, Termez

Abstract

Testing the methods of planning the production of electricity of the hydroelectric power plant on the basis of data on the factors that make up the flow

Tursunov B. M., Makhammadiev F. M.

DSc, Professor, Institute of energy problems of the Academy of Sciences of the Republic of Uzbekistan, 100074, Tashkent, Uzbekistan

Junior scientific researcher Institute of energy problems of the Academy of Sciences of the Republic of Uzbekistan, 100074, Tashkent, Uzbekistan

Abstract

Investigation of the metal deoxidation process in the development of the composition of ceramic fluxes for automatic arc welding of low-carbon and low-alloy steels

S.S. Khudoyorov, L.V. Galperin, N.S. Dunyashin, M.Z. Abdullaev

Associate Professor, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan

Researcher, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan

Head of the Department, Doctor of Technical Sciences, Professor, Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan

Assistant of the department of "Technological machines and equipment" of Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan.

Abstract

Using Hydraulic Jet Pumps in Pumping Stations

Faxriddin Nosirov , Boboraim Urishev , Abdurasul Juraev

Tashkent state technical university, Tashkent, Uzbekistan

Karshi engineering and economic institute, Karshi, Uzbekistan

Tashkent state technical university, Termiz Branch, Termiz, Uzbekistan

Abstract

Investigation of utilization technologies in existing heating units.

Khurramov B.S.

Junior scientific researcher Institute of energy problems of the Academy of Sciences of the Republic of Uzbekistan, 100074, Tashkent, Uzbekistan

Abstract

Analysis in a closed system of Frequency controlled Electric drives

Shavazov A.A., Sayfullaeva L.I. Tuxtaev B.B.

PhD, Heads of laboratories. Institute of energy problems Academy of Sciences of the Republic of Uzbekistan Ch. Aytmatov str., 2-B Tashkent 100084, Uzbekistan

Junior scientific researcher Institute of energy problems Academy of Sciences of the Republic of Uzbekistan Ch. Aytmatov str., 2-B Tashkent 100084, Uzbekistan

MA student. Tashkent State Technical University Named After Islam Karimov. University 2 A Street Tashkent 100095, Uzbekistan

Abstract

Designing a Following System with Wave Channels Taking into Account the Measurement Noise and Disturbances on the System

Ataullaev Azizjon Odilovich, Ataullayev Odil Khasanovich

Phd docent, of the department Mechanical engineering, Navoi state mining institute, Uzbekistan

Docent, Navoi state pedagogical institute, Uzbekistan

Abstract

Investigation of the interaction of molten metal with nitrogen and hydrogen in the development of the composition of ceramic fluxes for automatic arc welding of low-carbon and low-alloy steels

S.S. Khudoyorov, L.V. Galperin, N.S. Dunyashin, M.М. Payazov, N.T. Pakhmatullayeva

Associate Professor, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan

Researcher, Doctor of Philosophy in Technical Sciences (PhD), Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan

Head of the Department, Doctor of Technical Sciences, Professor, Department of Technological machines and equipment, Tashkent State Technical University named after Islam Karimov, Tashkent, Uzbekistan

Assistant of the department of "Technological machines and equipment" of Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan.

Assistant of the department of "Technological machines and equipment" of Tashkent State Technical University named Islam Karimov, Tashkent, Uzbekistan.

Abstract

BLOOD DISEASES

K.Malleswari⃰, D.Rama Brahma Reddy*, U.Ravindra babu*, Sk.Saidu babu*, P.Niharika*

Nalanda Institute of Pharmaceutical Sciences, Kantepudi (v), Sattenpalli(m), Guntur(dt)

Abstract

Electrochemical Studies of Yttrium Sulphide Films

U.K. Mohite

Department of Physics, M.B.S.K. Kanya Mahavidyalaya, Kadegaon, Dist- Sangli-415304 (M.S.) India

Abstract

Extracellular Enzyme Activities of Storage Fungi Isolated from Some Medicinal Plants of Maharashtra

Jadhav Ramesh Rangrao

Department of Botany, M.B.S.K. KanyaMahavidyalaya,Kadegaon, Dist.-Sangli – 415304 (M.S.) India.

Abstract

Standing Desk Rotary Axis Welding Table

Nihal.S.Jamadar, Prithviraj.P.Jadhav, Aditya.N.Doijad, Chinmay.G.Patil, Mahesh.S.Kale

Student, Mechanical Engineering Department, Sanjay Ghodawat Polytechnic,Atigre,Kolhapur

Student, Mechanical Engineering Department, Sanjay Ghodawat Polytechnic,Atigre,Kolhapur

Student, Mechanical Engineering Department, Sanjay Ghodawat Polytechnic,Atigre,Kolhapur

Student, Mechanical Engineering Department, Sanjay Ghodawat Polytechnic,Atigre,Kolhapur

Lecturer, Mechanical Engineering Department, Sanjay Ghodawat Polytechnic,Atigre,Kolhapur

Abstract

An Overview of Wireless Sensor Network (WSN) and Its Applications

Yousif K. Yousif, Omar H. Mohammed, Zainab Abdulateef Rashed

Computer Techniques Engineering, Al-Hadba University College, Mosul, Iraq.

Abstract

Using The Least Square Method for Estimation Number of New Students

Rina Candra Noor Santi, Sri Eniyati, Veronica Lusiana

Department of Computer Science/Informatics, Information Technology and Industry Faculty, Stikubank University, Indonesia.

Abstract

The Impact of E-learning Service Quality on the Student Grades

Kristophorus Hadiono, Sugiyamta, Rina Candra Noor Santi

Department of Information System, Information Technology and Industry Faculty, Stikubank University, Indonesia.

Department of Information System, Information Technology and Industry Faculty, Stikubank University, Indonesia.

Department of Computer Science/Informatics, Information Technology and Industry Faculty, Stikubank University, Indonesia.

Abstract

Numerical investigation of effect of Reynolds number and spin ratio on aerodynamic coefficients of Flettner rotor

Prasad Deshpande, Dr. D.K. Chavan

Research Scholar, Department of Mechanical Engineering, Shri Jagdishprasad Jhabarmal Tibrewala University, India Ex. Principal, Siddhant College of Engineering, Pune, India

Abstract

Flow Schematics When Opening Gas and Gas Condensate Fields by Horizontal Wells

Akramov Bakhshillo Shafievich, Akhmedov Mirzaanvar Mokhidjonovich, Akhmedov Muzaffar Mokhidovich

Ph.D., professor, Branch of the Gubkin Russian State University of Oil and Gas in Tashkent, Uzbekistan

Self Applicant, Tashkent State University named after Islam Karimov, Tashkent, Uzbekistan,

Head of the production and technical department, JV LLC "Gazli Gas Storage", Tashkent, Uzbekistan

Abstract

Reliability of Semiconductor Converters of Temperature and Humidity of Disperse Media with Respect to Catastrophic Failures

Rakhmanov Anvarjon Tojiboevich, Kuznetsov Stepan Fedorovich

Professor, Department of Metrology, technical regulation, standardization and certification of Tashkent State Technical University, Tashkent, Uzbekistan

Head of the testing laboratory, Limited Liability Company "ALPHA SMART STANDART", Tashkent, Uzbekistan

Abstract

Improvement of The Design and Substantiation of The Parameters of The Working Bodies and Drive Mechanisms of The Bitter Separator Machine

Djuraev Anvar Djuraevich, Ashurov Khisrav Khurshid o’g’li, O’rozov Akobir Abdunazar o’g’li, Abdiyev Bobur Kamol o’g’li, Nuriddinov Sur’at Zavqiddin o’g’li

Professor, Tashkent Institute of Textile and Light Industry, Uzbekistan

Assistant teacher of the department Mechanical engineering, Navoi state mining institute, Uzbekistan

Student of the department Mechanical engineering, Navoi state mining institute, Uzbekistan

Student of the department Mechanical engineering, Navoi state mining institute, Uzbekistan

Student of the department Mechanical engineering, Navoi state mining institute, Uzbekistan

Abstract

The Process of Regeneration of Used Engine Oils Using Nanomembranes

Aliev Abror Akbarovich, Aslonov Adizkhon Akhrorovich, Urinov Abror Akhrorovich

Institute of General and Inorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan;

Bukhara Engineering Technological Institute

Bukhara Engineering Technological Institute

Abstract

Complex Processing of Used Engine Oils

Aliev Abror Akbarovich, Aslonov Adizkhon Akhrorovich, Urinov Abror Akhrorovich

Institute of General and Inorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan;

Bukhara Engineering Technological Institute

Bukhara Engineering Technological Institute

Abstract

Calculation and Design of Buildings (Structures) Taking into Account Seismic Loads According to KMK 2.01.03-19

Ubaydulloyev M.N., Ubaydulloyev O., Ubaydulloyeva N.,

Professor; Samarkand State Architectural and Civil Engineering Institute

Applicant; Samarkand State Architectural and Civil Engineering Institute

Senior researcher; Samarkand State Architectural and Civil Engineering Institute

Abstract

Stability of Elongated Plates Reinforced along the Contour with Thin-Walled Rods

A. Melikulov , N.Melikulov , N.Melikulov

Ph.D. Associate Professor Sam SACI, "Structural Mechanics and Resistance of Materials", Samarkand State Institute of Architecture and Civil Engineering

Ph.D. Associate Professor Sam GASI, "Construction mechanics and resistance of materials", Samarkand State Institute of Architecture and Civil Engineering

Ph.D. Associate Professor Sam GASI, "Building Mechanics and Strength of Materials", Samarkand State Architectural and Construction Institute

Abstract

Cleaning a Waste Paper Mass by Using a Flotation Method

Abdumajidov Anvar Abdumalikovich, Karimov Baxrom Boxodirovich, Miratayev Abdumalik Abdumajidovich, Nabiyeva Iroda Abdusatovna

Tashkent Institute of Textile and Light Industry, Uzbekistan, Tashkent, Shohjahon street – 5.

Abstract

Intensification of the Process of Dyeing Mixed Fabrics with Cubic Dyes

Irmatova M.B., Nabiyeva I.A., Suyarova Kh. Kh., Murotaliyeva Y.A.

Candidate of Technical Sciences, Senior Lecturer at Tashkent Institute of Textile and Light Industry, Republic of Uzbekistan, Tashkent

Doctor of Technical Sciences, Professor at Tashkent Institute of Textile and Light Industry, Republic of Uzbekistan, Tashkent

Senior Lecturer of Navoi State Pedagogical Institute, Republic of Uzbekistan, Navo

Master student at Tashkent Institute of Textile and Light Industry, Republic of Uzbekistan, Tashkent

Abstract